Assuming reasonably level keys and consistent dip, I would use a capstan regulator to both raise the hammer line and adjust let off. Next in importance to me is drop, next is rep spring tension ( of course I rough in checking here as well if needed). Adjust these things on an old neglected grand and you'll have an amazing result for a quick and dirty regulation. YMMV Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Willem Blees Sent: Saturday, February 16, 2008 9:49 PM To: Pianotech at ptg.org Subject: Hypothetical situation I just worked on a forty year old Weber grand action: shape hammers, rep springs, let off, the usual. As I was working, a thought occurred to me. What if I was given one tool, and one hour, what would I do to make the action play better. So that is my question to your guys. What regulation would you do in one hour, using only one tool? (You may do two regulations, but you are still only allowed to use that same tool). Please explain what you would do, and why? No repairs are needed, and the time does not include tuning. Have fun. Willem (Wim) Blees, RPT Piano Tuner/Technician Honolulu, HI Author of The Business of Piano Tuning available from Potter Press www.pianotuning.com _____ More new features than ever. Check out the new AOL Mail <http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=ao lcmp00050000000003> ! -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080216/012e692a/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC