Clear DayQuestion: I know I could use a router instead of a dado blade for stock removal, but I just can't help but think of nasty tearout in that key with the dado set up. I assume you don't have that problem, do you use it simply for fast removal reasons? Fenton Hi Fenton, I just recently tried out the dado for a set of balance hole inserts and found there was way less tear-out than with a router. I was very pleased; didn't even have to back the work up. You also have more options for the width by adding or subtracting dado shims. Nice work, Mike! Jude Reveley, RPT Absolute Piano Restoration, LLC Lowell, Massachusetts (978) 323-4545 ----- Original Message ----- From: Fenton Murray To: Pianotech List Sent: Tuesday, February 19, 2008 10:44 PM Subject: Re: mortise inserts slideshow Mike, I figured out the slide show, I didn't scroll down far enough on the page. I'll be ordering soon off your site. Great photos, thanks for your time in this. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080219/4e70c8e1/attachment.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5675 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080219/4e70c8e1/attachment.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC