Clear DayI saw the spring clamp, now it's clear. Thanks, William. Fenton ----- Original Message ----- From: William R. Monroe To: Pianotech List Sent: Tuesday, February 19, 2008 8:10 PM Subject: Re: mortise inserts slideshow Fenton, If you look in the slideshow, the slide that shows removing the worn material from a natural clears that up. They've clamped a small sacrificial scrap of wood on the trailing edge of the key to prevent tear-out. William R. Monroe SNIP Question: I know I could use a router instead of a dado blade for stock removal, but I just can't help but think of nasty tearout in that key with the dado set up. I assume you don't have that problem, do you use it simply for fast removal reasons? Fenton -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080220/bda6a007/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5675 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080220/bda6a007/attachment-0001.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC