Wood Specie Insert for Capstan

Fenton Murray fmurray at cruzio.com
Mon Feb 25 19:01:30 MST 2008


Terry,
You've got me thinking on this and something that I do with let off buttons comes to mind & might work with the capstans. Along with a counter sink, or maybe instead of, try a counter bore to help the capstan start tracking straight down the hole. Drill the first 1/4" big enough to start the capstan by hand, maybe so the threads just barely catch. Surely 5/8 or 3/4 of solid thread contact is plenty, and if the first 1/4" or so is a poplar insert, man, that sounds like a machine shop job. I never seem to move the capstan completely into new wood, so this is always a problem. 

Fenton
  ----- Original Message ----- 
  From: Farrell 
  To: pianotech at ptg.org 
  Sent: Monday, February 25, 2008 7:29 AM
  Subject: Wood Specie Insert for Capstan


  I moved a capstan line on a set of key and had lousy results. I plugged the original holes with el-cheepo 2x4 spruce from the local home improvement store. The wood had super-wide grain and the material between winter wood was like styrofoam. When I pressed the capstans in place, many wandered because of the harder original wood and the new spruce on some completely collapsed - really weird - but the end result is a wandering capstan line - just won't do.

  So, I'm in the process of routing a 3/4" wide section out of the capstan area (instead of plugging again) from each key to start fresh. I was thinking of gluing a piece of maple in there, but then I thought, well, maybe the maple would be too hard for pushing in a capstan and expecting appropriate capstan-turning torque - maybe just strip the threads off the darn thing. Maybe I should use something softer - poplar perhaps? Or maybe I should go with a wood more close in characteristics to the original wood (think it is sugar pine) - I don't have sugar pine, but I think I may be able to find a little piece of Sitka Spruce somewhere around the shop. 

  Maybe a nice fine grained flat sawn piece of Sitka (I think that is where I am leaning)? Thoughts?

  Terry Farrell
  Farrell Piano

  www.farrellpiano.com
  terry at farrellpiano.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080225/c784109e/attachment.html 


More information about the Pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC