pull the damper, push out the wire and flatten it...swedge it a bit on an anvil and tap it back in... David Ilvedson, RPT Pacifica, CA 94044 Original message From: "Piano Boutique" To: pianotech at ptg.org Received: 6/23/2008 4:18:58 PM Subject: Swiveling damper problem Greetings again list, Joe was so helpful with my glue applicator problem that I thought I would ask you all another question I have a piano that where the wire goes into the damper head on a grand is loose. I have been lead to believe that CA glue will not work on metal and that is why CA glue works on tuning pins in the pin block. Does anyone have a suggestion as to how I might make this fit tighter, so the damper does not swivel on the wire. Thanks, William PIANO BOUTIQUE William Benjamin The tuner alone, Preserves the tone. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080623/4f0fe012/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC