Screw Holder

[Joe And Penny Goss]

They only carry the short one
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Leslie Bartlett 
  To: 'Pianotech List' 
  Sent: Friday, May 02, 2008 9:13 PM
  Subject: RE: Screw Holder


  Why not try an auto supply house
  les bartlett



------------------------------------------------------------------------------
  From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of J Patrick Draine
  Sent: Friday, May 02, 2008 7:10 PM
  To: Pianotech List
  Subject: Re: Screw Holder


  Well the ones from Tuners Supply and Apsco were AOK, but I lost those, and bought a couple from Schaff. I found them nearly useless -- they didn't release with enough clearance for the typical upright  flange screw head. I did complain to several of the Johnsons at past conventions' suppliers exhibits -- "Oh, really?" was their response! 
  Maybe they've changed their specs -- I hope so!
  Joe Goss' screwholder is very good, but not completely idiot proof (screws can drop off if you're not careful). I own two.
  Patrick Draine




  On Fri, May 2, 2008 at 2:02 PM, Phil Frankenberg <philfrank56 at comcast.net> wrote:

    I've lost my screw holder.  It was the rigid shaft type purchased from 
    Schaff over thirty years ago. Before I order a new one, I'd appreciate any recommendations any of you may have.
    Thanks in advance.

    Phil Frankenberg
    CSUChico
    Chico, Ca.




  No virus found in this incoming message.
  Checked by AVG.
  Version: 7.5.524 / Virus Database: 269.23.7/1410 - Release Date: 05/01/2008 5:30 PM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080502/a37464fe/attachment.html