Thanks everyone for all your advice. This is what I came up with. I first traced the bottom of the key onto a paper then cut the sides of the keys. I then glued on some spruce blanks. After the glue dried I trimmed them to the original measurement. I am now working on the ivories. Lots of fun!!! Jack Houweling -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080510/12ede0e3/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: may9.08 063.jpg Type: image/jpeg Size: 37952 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080510/12ede0e3/attachment-0001.jpg
This PTG archive page provided courtesy of Moy Piano Service, LLC