Mathematically, the ratio should be L/l with L the distance between front-pinsbackrail-strip and l the distance between banlance-pins and front-pinsbackrail-strip... h is the increasing of key height H the increasing of dip LC ----- Original Message ----- From: "Phil Bondi" <phil at philbondi.com> To: "Newtonville" <pianotech at ptg.org> Sent: Sunday, May 11, 2008 6:19 PM Subject: [Norton AntiSpam] Ratio question > Hi all, and Happy Mothers day to all the Mothers out there. > > Is there a ratio that can be looked upon as a standard with > the following scenario: > > If you increase the key height by ... , you will increase > dip by ... . > > Something tells me it's not a 1:1 ratio. > > Curious Rook, > > -Phil Bondi(Fl) > -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 1586 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080511/ad11a2fb/attachment.gif
This PTG archive page provided courtesy of Moy Piano Service, LLC