Torsion-bar return spring for damper pedal.

[Ron Nossaman]

> Dimensions are;
> 
> Made from 3.0 mm diameter wire
> Overall length between the end-arms - 250 mm (centre to centre)
> End arm lengths 18 mm, measured from centre of torsion bar to arm end.
> End arms a orientated such that they are at 90 degrees offset relative 
> to each other.
> 
> Any clues as to a possible supplier would be greatly appreciated.
> 
> Best,
> Ron O.

Hi Ron,
Hobby shops supplying model airplane builders. They'll have 
music wire up to at least 6mm.
Ron N