To work around your school's policy against splices, get a new cord plug at your favorite home improvement center, cut the cord near the humidistat, install new end, and plug in an extension cord. But for a stage piano I would recommend setting up the piano with a retractable cord. Get an inexpensive retractable work light, 2 male cord ends and one female end. Install one of the new male ends near the humidistat as per above. Cut off the male plug on the work light and install the female end. Cut off the work light and install the male end. Mount the cord reel up underneath the belly close enough that you can plug the humidistat into the female end. Now when the piano is moved you can safely retract the cord to get it out of the way. > > > > *Dean* > > Dean May cell 812.239.3359 > > PianoRebuilders.com 812.235.5272 > > Terre Haute IN 47802 > > > ------------------------------ > > *From:* pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] *On > Behalf Of *reggaepass at aol.com > *Sent:* Wednesday, November 05, 2008 4:10 PM > *To:* pianotech at ptg.org > *Subject:* [pianotech] Dampp-Chaser component issues > > > > We have come up against two problems with the components of our > Dampp-Chaser systems. > > > > One is damage to the power cords by stage dollies when the piano is mounted > on one and gets moved around at all. The problem is that the ac power cords > get run over by the dollies. Over time, the insulation of the cords become > worn enough that the copper wire itself becomes exposed or, worse yet, the > cords become severed. Our school's safety policy prohibits taping of exposed > wire or splicing and taping a severed cord, and it doesn't look like there > is a consumer-feasible way to replace the cord, requiring replacement of the > humidistat (which is lots of $$$, considering it is really a cord-related > problem). > > > > Does anyone know of something in which the power cords can be encased, so > as to leave them flexible, yet make them more impervious to the effects of > being run over by the wheels of the stage dollies? Or is there a way to > replace the power cord without "compromising" the housing of the humidistat? > > > > > The other problem is what to do when the rivet that holds the low-water > warning light probe in place gives up the ghost and no longer does it's > job. Has anyone else out there run into this and developed a reliable fix? > > > > Thanks, > > > > Alan Eder > > > > > ------------------------------ > > Instant access to the latest & most popular FREE games while you browse > with the Games Toolbar - Download Now!<http://pr.atwola.com/promoclk/100000075x1212904500x1200818240/aol?redir=http://toolbar.aol.com/games/download.html?ncid=emlweusdown00000004> > -- Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081105/310ef7e5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC