[pianotech] yamaha C3 pin block removal

[Mike Spalding]

Larry,

Yes, must be sawn out of there one way or another.  The pinblock has a 
tongue that's set into a groove in the stretcher.  I've done a few with 
a hand saw.  I suppose you could use a sawzall, or the Bolduc router blade.

Mike

Larry Fisher RPT wrote:
> I have a 1968 C3 in my shop that needs a new pinblock.  After pulling 
> the plate, I found the pinblock to be securely attached to the rim.
>  
> Does this puppy need to be cut out of there with a sawzall??  Any 
> experienced people out there on this model??
>  
> Larry Fisher RPT
>  
>