>Yes, must be sawn out of there one way or another. The pinblock has a >tongue that's set into a groove in the stretcher. I've done a few with >a hand saw. I suppose you could use a sawzall, or the Bolduc router blade. Or the Fein MultiMaster: https://www.4multimaster.com/vcc/feinpowertools/multimaster/565787/ I haven't cut out a block yet but I did remove a bass bridge body from the apron in short order and very neatly at that. One tool I'm glad I have. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081113/abcb8edc/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC