Jim, thanks for posting the pics. I have been using the Wixey gauge, but I think your set up will make it much easier to use. I use the small angle iron from the Lowell gauge to measure the bass strings. Al G From: jimialeggio5 at comcast.net Sent: Saturday, November 22, 2008 3:16 PM To: pianotech at ptg.org Subject: [pianotech] Downbearing Noah, Instead of the Lowell gauge, I'm using a Wixey digital gauge to read the downbearing angles directly, without translating from the lowell's bubble readings or dial indicator readings. Any woodworking mail order carries them. The "foot" is dead simple to make, right out of the scrap bin. pics attached Jim I Grandpianosolutions.com(under construction) Shirley, Ma (978) 425-9026 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20081122/b11b3dac/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC