[pianotech] S&S Hammer rail question

[John Formsma]

Steve Brady's book recommends CA glue with accelerator. Protek (I
think) or some other release agent on the screw before putting it in
the hole to reform it.

On 11/25/08, Phil Bondi <phil at philbondi.com> wrote:
> I'm replacing Hammers, shanks, flanges on a D, and I noticed
> that 1 of the screws on the hammer rail is stripped.
>
> Is there a recommended best fix for this?
>
> Thanks,
>
> -Phil Bondi(Fl)
>
>


-- 
JF