I was a "three hour tune"r (kinda reminds me of the Gilligans Island theme song!) for quite a few years in the beginning. After attending an all day seminar with Jim Coleman, Sr. I wrote a letter to him telling him about my frustration with how long my tunings were taking. I just couldn't believe these guys who could tune a piano in an hour, or do a major pitch raise and tune in an hour and a half. It seemed physically impossible! Mr. Coleman wrote me back and said that the trick is to get so you can do a 10-15 minute pitch raise. By focusing on the speed of the pitch raise, he claimed the whole tuning would become more efficient. It changed my life! (corny, but true!!) On Sun, Aug 2, 2009 at 5:52 PM, Jim Busby <jim_busby at byu.edu> wrote: > Terry, > > I'm positive it was for pitch raises. "Pianos seem to want to be pitch > raised from A0 to C8". I wrote that down. Tried it, And never really like > it... > > Regards, > Jim > > > > > ------------------------------ > *From:* pianotech-bounces at ptg.org [pianotech-bounces at ptg.org] On Behalf Of > Terry Farrell [mfarrel2 at tampabay.rr.com] > *Sent:* Sunday, August 02, 2009 4:48 PM > *To:* David Ilvedson; pianotech at ptg.org > *Subject:* Re: [pianotech] Pitch raise criteria > > Dave - are you sure Dr. Sanderson advocated TUNING from A0 up to C8 - or > was that just for pitch raising? Seems to me he either advocated starting in > the temperament section or that it didn't matter. If the piano was at (or > very close to) the proper pitch, what the heck difference could it possibly > make what order you tune which string? > > Or maybe I'm all washed up (perhaps more likely than I care to > think.....). > > Terry Farrell > > > > Several years before I made the jump to using an ETD, I sat in a class > > taught by Dr. Sanderson (inventor of the SAT). He had conducted a study to > > see which tuning order produced the most stable tunings. The answer was to > > start at A0 and tune unisons as you go all the way to C8. That was one of > > the reasons I went to an ETD. > > > Some are worried such a procedure will cause the plate to crack from uneven > > > stress. Plates are so over-engineered I doubt it could make any difference. > > > Dave Stocker, RPT > > Tumwater, WA > > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090802/b4417953/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC