Joe, What is a spring steel split mute? And where do I get one? I normally use a Papps mute for the tri-chords, and whatever fits best for the bi-chords. Scott Jackson ----- Original Message ----- From: Joe Goss To: pianotech at ptg.org Sent: Wednesday, August 05, 2009 3:07 AM Subject: Re: [pianotech] Pitch raise criteria Hi, Each time I read others comments on pitch raising I am reminded of the futile attempts and The above is done with a wide rubber mute and the spring steel split mute. This mute works like the pap mute without the metal attack. Joe Goss -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090805/8c81ff7e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC