On Mon, Aug 17, 2009 at 4:46 PM, Ed Sutton <ed440 at mindspring.com> wrote: > The July 2009 issue of the Journal has an article with photos. > > Ed S. > > ----- Original Message ----- > *From:* Michael Magness <IFixPianos at yahoo.com> > *To:* Pianotech List <pianotech at ptg.org> > *Sent:* Monday, August 17, 2009 2:09 PM > *Subject:* [pianotech] Installing Vertical Piano Hammer Return Springs > > I am recalling a fairly recent post from someone regarding a method using a > long thin rod of some sort through the coils of the springs to keep them > oriented while installing. There were pics accompanying the post. > > I can't find it and for some reason the archives won't accept my password > that works fine on the list. I am doing the install this afternoon if the > person that posted it or someone that may have a copy of it could repost it > or send it offlist I would appreciate it. > > Mike > > -- > I intend to live forever. So far, so good. > Steven Wright > > > Michael Magness > Magness Piano Service > 608-786-4404 > www.IFixPianos.com <http://www.ifixpianos.com/> > email mike at ifixpianos.com > > Thanks Ed that must be what I'm remembering, I went through the Journals but couldn't find it! Oh well, all done now! Thanks all, the hanger wire worked great! Mike -- I intend to live forever. So far, so good. Steven Wright Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090817/7d0915ef/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC