Hanger wire method was introduced to us by Kathy Voss,RPT from Wisconsin at her Convention class many years ago...Also,for techs who are too busy to do this repair-Kathy can do it for you,talk to her... isaac On Aug 17, 2009, at 6:37 PM, Michael Magness wrote: > > > On Mon, Aug 17, 2009 at 4:46 PM, Ed Sutton <ed440 at mindspring.com> > wrote: > The July 2009 issue of the Journal has an article with photos. > > Ed S. > ----- Original Message ----- > From: Michael Magness > To: Pianotech List > Sent: Monday, August 17, 2009 2:09 PM > Subject: [pianotech] Installing Vertical Piano Hammer Return Springs > > I am recalling a fairly recent post from someone regarding a method > using a long thin rod of some sort through the coils of the springs > to keep them oriented while installing. There were pics accompanying > the post. > > I can't find it and for some reason the archives won't accept my > password that works fine on the list. I am doing the install this > afternoon if the person that posted it or someone that may have a > copy of it could repost it or send it offlist I would appreciate it. > > Mike > > -- > I intend to live forever. So far, so good. > Steven Wright > > > Michael Magness > Magness Piano Service > 608-786-4404 > www.IFixPianos.com > email mike at ifixpianos.com > > Thanks Ed that must be what I'm remembering, I went through the > Journals but couldn't find it! > Oh well, all done now! > > Thanks all, the hanger wire worked great! > > Mike > > -- > I intend to live forever. So far, so good. > Steven Wright > > > Michael Magness > Magness Piano Service > 608-786-4404 > www.IFixPianos.com > email mike at ifixpianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090817/dbaee26a/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC