Elwood, I have 10 Yamaha fallboard keys that appear to be roughly the same design as the pic you sent with the exception of that tiny notched out area and the design on the handle. The other area that could be of concern is the diameter of the shank. These Yamaha fallboard keys are in the vicinity of .176 in / 4.48 mm give or take diameter. The flat part is .081 in / 2.09 mm give or take. You decide if they will work by measuring your sample. Keith On Aug 30, 2009, at 2:36 PM, Elwood Doss wrote: > Attached is a photo of the key I’m looking for. Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090830/ff0b974f/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: Baldwin Vertical Key.jpg Type: image/jpeg Size: 34227 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090830/ff0b974f/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC