Paul Milesi wrote: > With replacement keytops mentioned above, will I be able to make this > action work after installing all new frame felts and new S&S hammers, > shanks, flanges, wippens, let-off regulating buttons? Find out. Set up samples with what you've got with specified key height, dip, and blow, leaving the back rail alone for the moment. See if you can get sharps and naturals to work the same with the official numbers. If you can't get the naturals to full dip without burying the sharps, you'll need to either shim the sharps up as suggested, or replace the naturals to the correct height relationship with the sharps. This was discussed in the long distant past of nine days ago on list. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC