[pianotech] Tight Tuning Pins

Jeff Deutschle oaronshoulder at gmail.com
Thu Jan 1 09:33:05 PST 2009


John:

Thanks for the reply and suggestion. I use both styles, depending on the
piano, also. If the stiffer hammers were available in heavier weights, I'd
be tempted to try one.

On Thu, Jan 1, 2009 at 12:25 PM, John Formsma <formsma at gmail.com> wrote:

>  On Thu, Jan 1, 2009 at 11:05 AM, Jeff Deutschle <oaronshoulder at gmail.com>wrote:
>
>>
>> Do you use more of a jerk or more of a smooth pull style?
>>
>
> I do both, and sometimes a combination, depending on the piano.  Some do
> better with a smooth motion -- some do better with an impact motion.
>
>
>> I have never felt a need for a stiffer hammer. It seems that there is so
>> much spring to the pin (otherwise how could the center of the stability
>> "dip" be found) that any spring in the hammer would not be significant.
>>
>
>
> All I can say is try a stiff hammer for a couple weeks of regular use, and
> then see what you think. :-)  As someone else mentioned, some come with a
> 30-day trial period.
>
> --
> JF
>



-- 
Regards,
Jeff Deutschle

Please address replies to the List. Do not E-mail me privately. Thank You.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090101/59066b60/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC