William, I don't much about this area of work, but what you have posted sounds and looks like a great idea. Thanks for the pic. Keith On Jan 1, 2009, at 8:42 AM, William Monroe wrote: > I think I've posted this before, but I've used wood epoxy or > something similar to make a mold of the capo. Lay a piece of coarse > emery cloth on the capo, squish the wood epoxy onto the cloth and > tape a cork sanding block on it to keep the pressure consistent > until it cures. End result is a shaped "sanding" block for your capo.
This PTG archive page provided courtesy of Moy Piano Service, LLC