Ed Sutton wrote: > Somebody clever out there should be able to design and make a two-step > reamer. > The first inch or so would be slightly undersized and non-cutting, to > allow for aligning the reamer, then the second step of the reamer would > do the cutting. > Ed S. > Sounds like a do-it-yourself job. Couldn't you just dull/size that much with a file? -- Conrad Hoffsommer, RPT - Keyboard Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 1-(563)-387-1204 // Fax 1-(563)-387-1076
This PTG archive page provided courtesy of Moy Piano Service, LLC