Well, I want somebody else to try it first, and test it on a few pianos! ES ----- Original Message ----- From: "Conrad Hoffsommer" <hoffsoco at luther.edu> To: "Ed Sutton" <ed440 at mindspring.com>; <pianotech at ptg.org> Sent: Monday, January 12, 2009 9:38 AM Subject: Re: [pianotech] repin CA'd pinblock > Ed Sutton wrote: >> Somebody clever out there should be able to design and make a two-step >> reamer. >> The first inch or so would be slightly undersized and non-cutting, to >> allow for aligning the reamer, then the second step of the reamer would >> do the cutting. >> Ed S. >> > > Sounds like a do-it-yourself job. Couldn't you just dull/size that much > with a file? > > > > -- > Conrad Hoffsommer, RPT - Keyboard Technician > Luther College, 700 College Dr., Decorah, Iowa 52101-1045 > 1-(563)-387-1204 // Fax 1-(563)-387-1076
This PTG archive page provided courtesy of Moy Piano Service, LLC