[pianotech] Broken Hammer Shanks

[Joe And Penny Goss]

Dry wall screw works well except for cedar shanks.
Then still the drywall screw helps to remove wood for freehand drilling with my hex drive bit
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: Matthew Todd 
  To: pianotech at ptg.org 
  Sent: Wednesday, January 21, 2009 2:37 PM
  Subject: [pianotech] Broken Hammer Shanks


        I went to service an old player upright today.  There are two broken hammer shanks, which I took with me.

        This will be my first go at angle boring, since one of the hammers is in the bass.

        I should have everything to do this project, but could I get some e-mails on some suggestions, etc?

        Thanks a lot!


        TODD PIANO WORKS 
        Matthew Todd, Piano Technician 
        (979) 248-9578
        http://www.toddpianoworks.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090121/2d1d84cd/attachment-0001.html>