Marcel- I like it! What if I wanted to thin the entire hammer? How well does it cut the felt? Ed S. ----- Original Message ----- From: Marcel Carey To: Pianotech List Sent: Saturday, January 24, 2009 4:48 PM Subject: [pianotech] Hammer tapering jig I've had a Spurlock tapering jig that I never used because I don't like working with the bench saw that much. I thought of using the Wagner Safe-T-Planer. So I made a simple crude prototype of a jig. I tried it and it works very nicely. It is simple, less noisy than the saw and I fear it less. Here are some pictures. I don't know if a lot of you have this tool, but I find it very usefull. Marcel ------------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090124/b889b823/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC