At least you niticed before you strung the piano. I've done it, too, William. So don't feel bad. Wim -----Original Message----- From: William Monroe <pianotech at a440piano.net> To: Pianotech List <pianotech at ptg.org> Sent: Wed, 28 Jan 2009 5:51 pm Subject: [pianotech] One of dem days Ever have one of those days? Mine was today. Shop day. Feeling pretty good about myself, the piano, etc. Piano is nicely refinished, plate goes back in without incident, perfect. Used my little rim guards that I made (gleaned from Alan McCoy - thanks Alan!) So perfect, awesome, not even close to any scratches. Plate screws, perimeter bolts in, snug.? ? Time to put the nuts on the nose bolts....... Nose bolts? What the.......? ? Who was responsible for that?!?!?!? ? Grrrr. I don't mind being reminded that I'm not perfect, but did it have to be like that? At least I didn't glue in the other music desk glide yet. <G>? ? On the up-side, I got to use my new Agraffe spinner (thanks again, Ron N.) today. Hot diggity, right next to, well, cashews and chocolate, I'm told.? ? William R. Monroe? ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090128/4922c5be/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC