It looks like this is the other side of the discussion that is going on in the Pianoworld technician forum: http://www.pianoworld.com/forum/ubbthreads.php/topics/1223332/replacement%20hammers%20for%20Weinba.html#Post1223332 Richard, With all due respect, I'm concerned about your approach to the voicing. The red flag for me was using steam on an Abel hammer. Abel hammers respond well to tradition needle voicing, and I would never choose to use steam on a hammer like this. If you have a client with discriminating taste, you may need to call in a tech who is a voicing specialist. I have done this on more than one occasion, and it has been very insightful. The client will usually appreciate that you are willing to bring in someone with more experience - they will feel that you really want them to be taken care of. You may also gain some very valuable information. -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090701/50ec1e3e/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC