[pianotech] bridle wires

[Tom Driscoll]

Scott,
 Great idea.

 Forget what I said about the glue. If I'm gonna steal an idea I'll make it 
the shrink tubing method,
Best to all ,
Tom D.



Subject: Re: [pianotech] bridle wires


>I have used small-diameter shrink tubing on this type of bridle wires to
> keep the bridle straps from sliding down off the "crook". Just cut the
> tubing into little 1/4" lengths, slide it over the bridle wire so the top
> end is just about where you want the bridle strap to sit, and shrink it
> onto the wire. This is a much faster and less expensive way of addressing
> the problem than installing new bridle wires.
>
> ------
> Scott A. Helms, Registered Piano Technician
>