Hi Keith: That's a good one! No sacrificial mutes this way. Will Truitt -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Keith McGavern Sent: Sunday, July 05, 2009 11:39 AM To: pianotech at ptg.org Subject: [pianotech] rubber donut grommet tip List, I don't recall if I ever sent this or not, so here it is. I use a rubber donut grommet to mute plain wire strings until they settle. Works great. I use needle nose pliers to insert and remove. Sincerely, Keith
This PTG archive page provided courtesy of Moy Piano Service, LLC