[pianotech] Pulling front rail pins

[David Love]

Definitely not.  

David Love
www.davidlovepianos.com

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Bruce Browning - The Piano Tuner
Sent: Wednesday, July 15, 2009 3:10 AM
To: joegarrett at earthlink.net; pianotech at ptg.org
Subject: Re: [pianotech] Pulling front rail pins

Hi List,
Has anybody tried something similar to this for pulling/lifting tuning
pins that have been pounded into the block too far.
I'm thinking this could improve the "look" and function before CA treatment.
Bruce Browning
The Piano Tuner.


> Since an olde friend invented this system years ago, I can answer with a
> better solution.
> Keep the original adjusting bolt w/knob, just weld another nut onto it.
> (one that will match up with a cheapie fender puller, from your local
> automotive parts house.) Ready made for pulling bridge pins, key pins and
> nose hairs