I guess we have a bunch of wimps as piano majors, but I never have to replace a string on the department pianos. Strange. Joy! Elwood Elwood Doss, Jr., M.M.E., RPT Piano Technician/Technical Director Department of Music 145 Fine Arts Building The University of Tennessee at Martin Martin, TN 38238 731/881-1852 FAX: 731/881-7415 HOME: 731/587-5700 ________________________________ From: Porritt, David [mailto:dporritt at mail.smu.edu] Sent: Thursday, June 04, 2009 5:46 AM To: pianotech at ptg.org Subject: Re: [pianotech] string replacement Jack: I leave the damper on. Here at the school I have to replace lots of broken strings so I get lots of practice. If you're careful you can work the string under the damper without damage. Of course, a majority of the treble strings that are broken don't have dampers. dp David M. Porritt, RPT dporritt at smu.edu From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jack Houweling Sent: Thursday, June 04, 2009 1:09 AM To: Pianotech List Subject: [pianotech] string replacement Hello all, I have a question about replacing a string on a grand piano. When replacing a string do you remove the damper or leave the damper in? Does it matter? I would like to hear what you all do. Regards, Jack Houweling -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090604/bd6e27ff/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC