[pianotech] (no subject)

[Gary]

I've always found Wurlitzers notorious for having tight whippen flange 
centers.

Matthew Todd wrote:
> I went to pitch raise/tune a new clients piano today.  The piano is a 
> Wurlitzer Console.
>  
> Almost the entire treble section was sluggish upon return of each 
> key.  So I began my investigative process.  I held the key with one 
> hand and moved the hammer with the other.  It returned just fine.  I 
> then held the key and moved the backcheck, and it returned fine.  I 
> thought maybe tight balance rail bushings.  So I eased a sample key, 
> but it did not good.  I could not figure out what the problem was.
>  
> Any help please?
>
> ***_TODD PIANO WORKS_*
> Matthew Todd, Piano Technician
> (979) 248-9578
> http://www.toddpianoworks.com <http://www.toddpianoworks.com/>
>