[pianotech] Does shank glue fill affect voicing?

[Tom Sivak]

--- On Sun, 6/7/09, KeyKat88 at aol.com <KeyKat88 at aol.com> wrote:

From: KeyKat88 at aol.com <KeyKat88 at aol.com>
Subject: [pianotech] Does shank glue fill affect voicing?
To: pianotech at ptg.org
Date: Sunday, June 7, 2009, 1:39 AM


 
 
 
Greetings,
 
        If in a hammer replacement job, one hammer,s bore angle is unintentionally bored at the wrong angle, and so to remedy it you make the hole alittle larger to get the correct angle and its filled in with glue, (or glue and sawdust mix) will that hammer sound different than its neighbors who have the better fit and proper glue? Curious.
 
Thanks,
Julia
Reading, PA
 
 
 
 
 
 
 
 
 
 
 
 
 Stay connected and tighten your budget with a great mobile device for under $50. Take a Peek! 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090607/c555860d/attachment.htm>