Hey Barbara, Nice little set-up you have! It looks very worker friendly. Now if I could do the same with my shop ;>) (it's kind of messy right now!) If nothing eases after 24 hours...bummer...repin! Paul Barbara Richmond <piano57 at comcast.net> Sent by: pianotech-bounces at ptg.org 06/08/2009 03:32 PM Please respond to pianotech at ptg.org To pianotech <pianotech at ptg.org> cc Subject [pianotech] Speed drying treated flanges Hi all, I thought I had hit all these Wurlitzer/YC flanges with alcohol & water, but found when I started repinning the hammer flanges that there were still some pretty darn tight ones. Hmm. Maybe there's something wrong with my syringe technique or maybe these were super tight. Anyway, I really want to be done with this job, so I hit them again with the solution and have used my heat gun to help things along. Here are the questions, do I need to wait to repin, how long to I need to wait to repin, is there any special technique for speed drying treated flanges? BTW, here's a picture of my newly configured shoplette (the walkway through the laundry/furnace room). Thanks, Del, for suggesting the bench legs and shelves. It's a lot more comfortable working now. Oh yeah, the keyboard is on a board that I place over the laundry sink (double size) for extra counter space. Thanks, Barbara Richmond, RPT near Peoria, Illinois -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090608/0189ae63/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: 005.jpg Type: image/jpeg Size: 118349 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090608/0189ae63/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC