Rob, I sounds like you have a pretty good handle on things, and Ed has provided some excellent info. Good luck, Keith On Jun 13, 2009, at 11:45 AM, Rob McCall wrote: > Thanks Keith, > > Looking through the entire piano (A0 to C8), all the hammer shanks > appear to be resting on the felts, but this is the only section > where the felts were being displaced. The blow distance I measured > at 50mm, book says 47.5mm. Even if they were set at 47.5 I believe > they'd still be in contact across the entire action. > > Regards, > > Rob McCall
This PTG archive page provided courtesy of Moy Piano Service, LLC