I will check to see if the tray is out of place, can the spoons be screwed in farther? Sent from my iPhone On Jun 15, 2009, at 8:57 PM, A440A at aol.com wrote: > > << damper spoons in the levers that are hitting the > >> backcheck wires when the sustain pedal is used . Moving the action >> forward > >> is not an option. > >> Best solution? >> > > How are the wires oriented in the vertical plane? Can you move the > tray distally? Are the backchecks really hanging out that far over > the key end > felt? Maybe shorter spoons, or maybe the spoons were not installed > deeply > enough in the underlevers? Or, perhaps, the spoons are bend too far > up. I > assume that the dampers are lifting at the proper time? > Weird stuff. > > Ed Foote RPT > http://www.uk-piano.org/edfoote/index.html > www.uk-piano.org/edfoote/well_tempered_piano.html > <BR><BR><BR>**************<BR>An Excellent Credit Score is 750. See > Yours > in Just 2 Easy Steps! > (http://pr.atwola.com/promoclk/100126575x1221322979x1201367215/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072& > hmpgID=62&bcd=JuneExcfooterNO62)</HTML>
This PTG archive page provided courtesy of Moy Piano Service, LLC