<< damper spoons in the levers that are hitting the
> backcheck wires when the sustain pedal is used . Moving the action forward
> is not an option.
> Best solution? >>
How are the wires oriented in the vertical plane? Can you move the
tray distally? Are the backchecks really hanging out that far over the key end
felt? Maybe shorter spoons, or maybe the spoons were not installed deeply
enough in the underlevers? Or, perhaps, the spoons are bend too far up. I
assume that the dampers are lifting at the proper time?
Weird stuff.
Ed Foote RPT
http://www.uk-piano.org/edfoote/index.html
www.uk-piano.org/edfoote/well_tempered_piano.html
<BR><BR><BR>**************<BR>An Excellent Credit Score is 750. See Yours
in Just 2 Easy Steps!
(http://pr.atwola.com/promoclk/100126575x1221322979x1201367215/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&
hmpgID=62&bcd=JuneExcfooterNO62)</HTML>
This PTG archive page provided courtesy of Moy Piano Service, LLC