Looks old to me... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "David Love" <davidlovepianos at comcast.net> To: pianotech at ptg.org Received: 6/25/2009 5:59:48 PM Subject: Re: [pianotech] Retrofitting a Steinway w/adjustable back action >Ron: >Is that an original Steinway damper tray that you modified or a new one that >you built? >David Love >www.davidlovepianos.com >-----Original Message----- >From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf >Of Ron Nossaman >Sent: Thursday, June 25, 2009 1:47 PM >To: pianotech at ptg.org >Subject: Re: [pianotech] Retrofitting a Steinway w/adjustable back action >Al Guecia/AlliedPianoCraft wrote: >> Hi List, >> >> There was a discussion and some photos on this list about retrofitting >> a back action with adjustable let-off or capstan type adjustment >> screws. I am rebuilding a Steinway and would like to try it. Any >> photos showing the finished shelf and lifters, would be greatly >appreciated. >> >> Al >Al, >Here's what I do. >Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC