I would find some samples that have the correct damper lift with key, then use the Yamaha method using the damper tray to level the underlevers, i.e. turn up pedal rod and bring tray up to sample and loosen all other underlevers and retighten, etc. Probably what they did in the factory... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: Richard <richard.ucci at att.net> To: pianotech at ptg.org Received: 6/28/2009 1:35:48 PM Subject: [pianotech] Damper lift adjustment >List, >This 1967 Yamaha g-3 has no key end felt as you can see. The damper >levers have red felt like butt felt on the underside. >Where should I set my Spurlock damper jig? >Sent from my iPhone
This PTG archive page provided courtesy of Moy Piano Service, LLC