Yes but then I don't get to use my super cool Spurlock jig. Sent from my iPhone On Jun 28, 2009, at 6:35 PM, "David Ilvedson" <ilvey at sbcglobal.net> wrote: > I would find some samples that have the correct damper lift with > key, then use the Yamaha method using the damper tray to level the > underlevers, i.e. turn up pedal rod and bring tray up to sample and > loosen all other underlevers and retighten, etc. Probably what > they did in the factory... > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: Richard <richard.ucci at att.net> > To: pianotech at ptg.org > Received: 6/28/2009 1:35:48 PM > Subject: [pianotech] Damper lift adjustment > > >> List, >> This 1967 Yamaha g-3 has no key end felt as you can see. The damper >> levers have red felt like butt felt on the underside. >> Where should I set my Spurlock damper jig? > > > > >> Sent from my iPhone
This PTG archive page provided courtesy of Moy Piano Service, LLC