100% agree. This little gun is the bomb; reliable and gentle; cheap and controllable. DA P.S. thanks for the swag, Randy...<g> On Feb 28, 2009, at 3:42 PM, Randy Chastain wrote: > Lance, > YES! This is fabulous. I have used this for several years. It works > quickly ( you won't burn down the house) is light weight, > inexpensive and works like a charm. > <DSC01172.jpg> > Randy Chastain > San Francisco Bay area > > > On Feb 28, 2009, at 3:12 PM, Lance Levine wrote: > >> I like this small heat gun, called the Marvy Uchida Heat Embossing >> Tool. Currently $15 at joann.com. It seems less hot than the >> Princess, and makes a little more noise, but works perfectly well >> for twisting shanks and softening glue. >> >> Lance >> >> -- >> Lance Levine, RPT >> Moonrise Piano >> 978-618-8627 >> moonrisepiano.com >> <EmbossingHeatGun> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090301/8ebef3d8/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC