Hi Chuck, If the screws you are looking at are anything like some of the hermaphrodites I have encountered on Kimball studio uprights, once the dust has cleared, the tool of choice will be vise-grips :) (and replacement with new, more driver-compatible screws). Cheers, Alan Eder -----Original Message----- From: Chuck Raynor <diggeray at comcast.net> To: pianotech at ptg.org Sent: Thu, 26 Mar 2009 10:56 am Subject: [pianotech] Kimball action bracket screws Hi list, While tuning a Kimball console with Schwander action the other day, I noticed the screws holding the action brackets to the piano were different than I, with my limited experience, have seen before. Thought I'd ask about them before I have to take them out someday! They seem to be a cross between a philips head and a square drive--that's the best I can do. They don't look like a philips screwdriver would be very effective. What's the tool of choice? Thanks. Chuck Raynor Raynor Piano Service Beaufort, SC -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090326/86e59c8a/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC