Was there any lost motion? Andrew Anderson On May 6, 2009, at 7:10 PM, Matthew Todd wrote: > I went to tune a clients piano today. It is a Kawai Console, year > 1986. > > The very first thing I noticed was the hammer line was totally > screwed up. Some of the hammers were resting on the rail, and > others were off the rail. I unscrewed the action bracket nuts and > pulled the action back a little until all the hammers were resting > on the rail. > > I will be going to do some voicing tomorrow, but pointed this out to > the client as a need to fix, so I will be doing that as well. > > What issue might this be? What could I go to first to see if that > is the problem? > > Thanks, > > TODD PIANO WORKS > Matthew Todd, Piano Technician > (979) 248-9578 > http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090506/08e514f5/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC