In a message dated 2009-05-10 17:09 Eastern Daylight Time, jonpage at comcast.net writes: A jig is not needed. Glue the action cloth in flat with a glue line at each end. Once the glue has dried, thread a piece of bushing cloth through the unglued center section. It draws the cushion firmer as well. -- Regards, Jon Page Ahhh,, that's how its done, makes sense to thread in the red cloth later. Thanks Jon Tom Ayers **************The Average US Credit Score is 692. See Yours in Just 2 Easy Steps! (http://pr.atwola.com/promoclk/100126575x1222376999x1201454299/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=M ay51009AvgfooterNO62) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090510/75adeaa6/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC