I'm curious how those of you who do radial ribs arrays deal with the fact that in such a pattern the ribs will be closer together on the bent side of the case creating somewhat of a differential in stiffness from one side of the board to the other. Do you do anything to compensate for that? I can see a couple of approaches if it mattered: First, stop every other rib somewhat short of the rim on that side; second, taper the ribs slightly narrower moving toward the bent side. Third, ignore it and go to the next problem. David Love www.davidlovepianos.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090529/c8408fc4/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC