[pianotech] waterproof plate bushings

Zeno Wood zeno.wood at gmail.com
Thu Nov 19 16:11:01 MST 2009


Just wanted to get a couple of opinions:

A nice Kawai RX-2, about 14-15 years old, which must have done something
really bad in a past life, because now it's been condemned to a high school
auditorium.  A few years back someone spilled some sort of sugary drink all
over the tuning pin area, and I've been asked to do something about it.  The
interesting thing is that it's not in bad shape all things considering.
There's a sticky mess all over the plate in the tuning pin area.  The
strings are not rusty except for some tuning pin coils.  The agraffes look
pretty nasty, but again, the strings don't show any rust.  The tuning pins
feel ok, and the bottom of the pinblock is clean.  It seems like the plate
bushings prevented the spill from going straight into the pinblock.  (are
they using waterproof plate bushings?)  Also, the action is fine.

How long would it take for pinblock contamination to manifest?  It's been
3-4 years since the spill.  Seems like all that's needed is a cleaning, and
replacing a bunch of strings.

-Zeno Wood, NYC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091119/c052a6e8/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC