Hmmmm, Oh well. Eight years and no warrenty claims....... ;-) Terry Farrell On Sep 3, 2009, at 8:20 PM, David Ilvedson wrote: > Woah....woah....Terry, that will null and void your warranty... > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: "Terry Farrell" <mfarrel2 at tampabay.rr.com> > To: pianotech at ptg.org > Received: 9/3/2009 6:00:08 AM > Subject: Re: [pianotech] Tuning wrench tip threads? > > >> That's what I was going to say. I wanted to shorten the shaft length >> of my Keith Bowman tuning lever, but that of course required new >> threads. I found a small local machine shop that did an A-1 job for >> me. > >> Terry Farrell > >> On Sep 3, 2009, at 2:13 AM, James Johnson wrote: > >>> A good machinist should be able to guage the tread size and make >>> whatever you need, probably better quality than you could do >>> yourself. >>> >>> ----- Original Message ----- From: "Jack Reisland" <reislandj001 at hawaii.rr.com >>>> >>> To: <pianotech at ptg.org> >>> Sent: Wednesday, September 02, 2009 8:39 PM >>> Subject: [pianotech] Tuning wrench tip threads? >>> >>> >>>> Does anyone know what size/ pitch the threads are in a standard >>>> tuning wrench tip? I am playing with making a wrench, and need to >>>> match it. >>>> >>>> Best Regards, Jack Reisland >>>> >>>> >>>> >>>> >>> >
This PTG archive page provided courtesy of Moy Piano Service, LLC