> Is the hammer butt resting on the jack?(Because the hammer shanks > aren't > resting on the rail as they should be--right)? Yes. > Capstan regulated/ shifted > too high? Well, yes, if you lowered the capstans, the hammer shanks would indeed fall back to the rest rail (if the capstans could be lowered that much). But I'm quite sure the capstans are at a reasonable height. Something else is the cause. Terry Farrell On Sep 11, 2009, at 12:20 PM, Amadeus Piano wrote: > Is the hammer butt resting on the jack? (Because the hammer shanks > aren't > resting on the rail as they should be--right)? Capstan regulated/ > shifted > too high? > > Gary
This PTG archive page provided courtesy of Moy Piano Service, LLC