While we're at it, a note about Schaff brass rail duplications: they don't do double rails like Kimball that have fingers on both sides, for hammer and damper flanges. DAMHIFO. Tom Cole Steve Blasyak wrote: > Hey Now to all, > > Thank you John Voight for your explanation on the hammer flange. No > agraffes on mine. It does have the lost motion compensator though. > > Thank you John Ross for all of your advise on the brass rail. > > I really have not had any problems with it to speak of. I knew that > there could be some issues with the brass rail. I've noticed that > Shcaff will duplicate a brass rail. Not sure how much it cost. Perhaps > if I decide to do the hammers I'll worry about the rail. > > I tried to post some photo's at the same time I sent the original post > but nothing came through. I sent them to files at ptg.org > <mailto:files at ptg.org>. Any suggestions. > > Steve Blasyak > Orange County Chapter
This PTG archive page provided courtesy of Moy Piano Service, LLC